AIRO

AIRO

SPRAY CHARACTERISTICS

  • Fine atomisation of many liquids that cannot be atomised by hydraulic pressure alone.
  • Uniform solid cone. Spray angle varies with air pressure and flow. Separate metering device, such as orifice, metering pump or valve required.
  • Large flow passages greatly reduce clogging.

CONSTRUCTION AND MATERIALS

  • Three part construction:
  • Nozzle body – Brass or 303 Stainless Steel. Thread sizes:3/4″-20 UNEF on No. 30615 and 11/8″-18 UNEF on No. 30616.
  • Distributor – Brass or 303 Stainless Steel.
  • Screw pin – Brass or 303 Stainless Steel.
  • Adaptors are available (refer to chart).

ORDER EXAMPLE

  • 30615-15 Brass (nozzle).
  • 23034-1 Brass (Adaptor).

Capacity Charts

Related Products