Spray Characteristics

• Uniform distribution with finest possible atomisation using direct liquid pressure alone.
• The standard spray angles of 80° are the nominal angles close to the nozzle orifice.
• For small capacity tips up to say 8 litres/hour the angle falls off rapidly a few inches from the tip. The larger the tip size the further the nominal angle projects before the spray begins to fall away.
• The nozzles produce a hollow cone spray but with the small capacity tips the spray rapidly merges into a “Solid” cone type.

Construction and Materials

• Nozzle tips precision machined to ensure most perfect spray available at low throughputs.
• Internal distributor, screw pin and strainers are renewable in most sizes.
• Available in Brass and 316 Stainless Steel as standard.
• Nozzle has 1/4" Male BSPT thread as standard.
• Other materials available to special order.
• Mesh filters sold separately, please contact for more details on filtration, material and size.

Order Example

• WM 1408 Brass.
• Maximum Recommended Pressure: 35 Bar.G.}