WDA

SPRAY CHARACTERISTICS

• Finely atomised hollow cone spray pattern.
• Available spray angles of 30°, 45°, 60°, 70°, 80° and 90° at 8,6 Bar.G. pressure.

CONSTRUCTION AND MATERIALS

• • Nozzle consists of five basic parts:
  • Nozzle body – Brass or 416 Stainless Steel.
  • Orifice Disc – 416 Stainless Steel.
  • Distributor – 416 Stainless Steel.
  • Retainer – Brass or 416 Stainless Steel.
  • Strainer – (used up to WDA 14).
  • Nozzle thread is 9/16″ – 24 UNEF.
  • Adaptors are available with 1/4″ Male BSPT and 1/8″/1/4″ Female BSPP and can be ordered separately.

ORDER EXAMPLE

• • • • WDA 8,0-70° Stainless Steel = Tip Only.
      • 1/4″ Female WDA 12,0-70° Brass = Complete Assembly

Maximum Recommended Pressure:

• • • 35 Bar.G.}