SNA™ Nozzle

The Siphon Type SNA™ Air Atomizing Nozzles are primarily used for extremely fine spray particle sizes at low air pressure. This type of nozzle produces a solid cone spray pattern with extremely fine particle size at low air pressures and low CFM. The nozzle will flow in either a horizontal or vertical position

Installation

• The air compressor should be capable of providing at least 10% more air than the specified values. All fuel and airline connections must be tight. Any leaks, especially in the fuel line, will have an adverse effect on the lift Characteristics
• The nozzle will flow in either a horizontal or vertical position. The lift distance for a vertical mounted nozzle is measured from the liquid level to the end (face) of the nozzle. The lift distance for the horizontal mounting is shown in the Installation drawing.
• If the combustion application does not permit the use of a constant level device, excellent Spray Characteristics can be obtained using a Fuel Metering pump and an air compressor. It is also possible to operate the nozzle in a closed pressurized system utilizing air pressure for both lifting and atomizing the fuel

WHEN ORDERING SIPHON TYPE SNA™ NOZZLES, be sure to include both part number and description. Order adapter separately specify P/N 17147