Assembly Procedure:
- Place Nozzle Body (A) thread side up on a flat surface
- Place the Orifice O-Ring (B) cone face down into the Nozzle Body (A)
- Place the Orifice Disc (C) onto the Orifice O-Ring (B) protruding side down
- Secure the Swirl Chamber O-Ring (E) onto the Swirl Chamber (D)
- Place the Swirl Chamber Assembly (D+E) swirl side down onto the Orifice Disc (C) into Nozzle Body (A)
- Secure the Adaptor O-Ring (F) into the recess on Adaptor (G)
- Screw down the Adaptor (G) into the Nozzle Body (A) securing all components in place and hand tighten only
- Finally ensure the complete assembly does not rattle
Compact SDX® Assembly Description and Part Numbers
| Compact SDX® Assembly Description and Part Numbers | ||
| Description | Part Number | Material |
| (A) Body | W203010035 | Stainless Steel |
| (B) Orifice O-Ring | A313520148 | Viton |
| W155100149 | Silicone | |
| (C) Orifice Disc | W20303-XXX* | Tungsten Carbide |
| (D) Swirl Chamber | See Swirl Chamber Chart | |
| (E) Swirl Chamber O-Ring | W203070013 | Viton |
| W203070021 | Silicone | |
| (F) Adaptor O-Ring | A313520148 | Viton |
| W155100149 | Silicone | |
| (G) 1/4 NPTF Adaptor | W203020034 | Stainless Steel |
| 3/8 NPTF Adaptor | W205370031 | |
| Thread Guard | W203230013 | Brass |
| Compact/Mini Adaptor | W214510031 | Stainless Steel |
| Removal Tool | W203080012 | Brass |
| Compact SDX® Seal Kit | (12 of each O-Ring) | |
| W203050015 | Viton | |
| W203060014 | Silicone | |
* Specify orifice size and swirl chamber suffix from capacity chart.
Please Note: This chart is only a limited illustration of available sizes. Special materials are available on request for particular applications, please contact us for prices and delivery.
Compact SDX® Swirl Chamber Part Numbers
| Compact SDX® Swirl Chamber Part Numbers | ||
| Ref | Part Number | Material |
| SA | W203040016 | Tungsten Carbide |
| SB | W203040024 | Tungsten Carbide |
| SC | W203040032 | Tungsten Carbide |
| SD | W203040040 | Tungsten Carbide |
Accessories
Literature
